This product comes from Alaris Kuhne catalogues
Low Noise Amplifier, 5000 ... 5900 MHz
KU LNA 500590 A
Active
This low noise broad band amplifier is designed to cover the frequency range from 5000 ... 5900 MHz with a gain of 26…27 dB. The noise figure is max. 1.8 dB.
Additional information
Product Data sheet
Download data sheetAdditional product downloads
No additional product downloads available.
Specifications
| Frequency range | 5000..5900 MHz |
| Noise figure @ 18°C | typ. 1.5 dB, max. 1.8 dB |
| Gain @ 25°C | typ. 27 dB, min. 26 dB |
| Output power (P1dB) | typ. 19 dBm |
| Output IP3 | typ. 27 dBm |
| Input return loss | typ. 11 dB |
| Output return loss | min. 9 dB |
| Maximum input power | 2 mW (3 dBm) |
| Supply voltage | +9 ... +30 V DC |
| Current consumption | typ. 60 mA |
| Operating case temp. range | -40 ... +65°C |
| Weight | 50 g |
| Dimensions (mm) | 50 x 30 x 17 |
- Telemetry
- Traffic monitoring
- Remote control
- Sensors
- Emergency response systems
- Spectrum surveillance
- RF Test Suites
- Airborne communication
- Threat detection
- Spectrum Monitoring
- Source geolocation
- Radio Direction Finding
- Radio Monitoring
- COMINT
- ELINT
- Radio Direction Finding
- C-ESM
- R-ESM
- FMCW Radar
- Speed and and obstruction detection
- Motion sensing
- Foreign object detection
- SATCOM
- Secure Communications
- Point-to-point Communications
- Repeaters, extenders and boosters
- Point-to-multipoint Communications
- Low probability of interception
- Digital
- Wireless backhaul
Product Applications
Infrastructure Management
Test and Measurement
Avionics
Spectrum Management
Signals Intelligence
Radar and Remote Sensing
Communications
Broadcast
- Low noise figure
High gain
High IP3 for good large signal performance
Very good input return loss (S11)
Unconditionally stable, no parasitic oscillations in case of poor antenna match
Static protection (ESD) at preamplifier input
Solder pin for direct power supply
Remote power supply via output connector
Milled aluminium case
Small mechanical dimensions
